Pot for brewing gyokuro

Post Reply
Janice
Posts: 262
Joined: Tue Oct 10, 2017 11:11 pm
Location: New Jersey

Tue May 15, 2018 12:31 pm

I love gyokuro and drink it at least several times a week. I’ve seen various opinions posted here and on other sites about style and clay and I’ve experimented with a variety of different clays and shapes. Right now my favorite is a 50 ml mixed porcelain Korean Pot that I purchases when Tead Off was selling tea ware ia Teaware Online.

I’m thinking about buying a small Banko pot but I’d really like to know what other people here find give them the best results.
Attachments
E8473590-6C42-4316-AB8A-6CDDECFFF0DE.jpeg
E8473590-6C42-4316-AB8A-6CDDECFFF0DE.jpeg (279.11 KiB) Viewed 8192 times
User avatar
pedant
Admin
Posts: 1516
Joined: Fri Sep 29, 2017 4:35 am
Location: Chicago
Contact:

Wed May 16, 2018 12:47 am

i've never had a banko kyusu. i like using a hokujo shiboridashi for gyo
User avatar
Chip
Admin
Posts: 371
Joined: Mon Oct 02, 2017 6:47 pm
Location: In the TeaCave atop Mt Fuji
Contact:

Wed May 16, 2018 6:43 pm

Typically gyokuro is brewed with a wide opening vessel like a shiboridashi or houhin. And the lid is often left off while brewing. The wide opening prevents overheating and allows viewing of the precious leaves.

I typically use a houhin because I have ... an abundance of them. I recently after all these years finally purchased my first "shib" by Hokujo.

Problem ... or benifit with most shibs is they are typically very low volume. Thus I prefer houhin which are often larger but still small enough.

Also, since I usually only have gyokuro on hand for a few months each year leading up to shincha. So I never compared clays much. If a houhin did not brew a satisfactory session, I would just move on to another.

Tokoname, Banko, Hagi are my primary go to clays ... but each can vary quite a bit. For instance, each tokoname potter uses seemingly different clays.
User avatar
Psyck
Posts: 112
Joined: Wed Oct 25, 2017 4:41 am
Location: Bangalore, India

Thu May 17, 2018 6:45 am

Is the height more or less the only difference between a shibo and houhin? Can both of them also be called an easy gaiwan?
User avatar
Chip
Admin
Posts: 371
Joined: Mon Oct 02, 2017 6:47 pm
Location: In the TeaCave atop Mt Fuji
Contact:

Thu May 17, 2018 1:32 pm

Psyck wrote:
Thu May 17, 2018 6:45 am
Is the height more or less the only difference between a shibo and houhin? Can both of them also be called an easy gaiwan?
The width to height ratio is typically higher on a shib. So yes, the shib is relatively wider and the houhin is relatively higher ... Typically.

The houhin typically has a round rim with a screen below the rim at the added spout. The lid covers the entire rim.

The shib typically has a spout as part of the rim, so the rim is not an absolute circle, and the lid does not cover the rim at the spout. The spout may have a "rake" or nothing at all.

You could call them a "gaiwanesque". :mrgreen:
Janice
Posts: 262
Joined: Tue Oct 10, 2017 11:11 pm
Location: New Jersey

Thu May 17, 2018 4:23 pm

Did I mention that I have TAD (teaware addiction disease)? I just counted 5 shibs and 4 hobins in my teaware cabinets. I did learn to brew gyokuro on Teachat following instructions from Kevin of O-Cha but I’ve been forgetting the part about leaving off the lid. I put it on for the photo because the glaze is so pretty. This is a 60 ml shib from Andresz Bero.

I’m still interested in Banko clay but clearly it’s not an emergency.
Attachments
7FBA1B9A-41FF-4441-B121-E5C1F5DCE918.jpeg
7FBA1B9A-41FF-4441-B121-E5C1F5DCE918.jpeg (228.57 KiB) Viewed 8077 times
User avatar
Psyck
Posts: 112
Joined: Wed Oct 25, 2017 4:41 am
Location: Bangalore, India

Fri May 18, 2018 5:09 am

Chip wrote:
Thu May 17, 2018 1:32 pm
<...>
You could call them a "gaiwanesque". :mrgreen:
Thanks for clarifying, I'm just a noob on Jap teas & teaware, do plan to get into it sometime in the future though.
User avatar
pedant
Admin
Posts: 1516
Joined: Fri Sep 29, 2017 4:35 am
Location: Chicago
Contact:

Fri May 18, 2018 5:19 am

please see also: viewtopic.php?f=20&t=504
Janice
Posts: 262
Joined: Tue Oct 10, 2017 11:11 pm
Location: New Jersey

Fri May 18, 2018 6:50 pm

5405FC15-AD34-4B5F-BB73-834C776D34FA.jpeg
5405FC15-AD34-4B5F-BB73-834C776D34FA.jpeg (292.62 KiB) Viewed 8033 times
My first shiboridashi. I purchased the set from O-Cha when they reopened after the tsunamI. I’m getting very good results even though the shib is glazed. Maybe technique is more important than clay.
User avatar
Baisao
Posts: 1397
Joined: Mon Dec 11, 2017 5:17 pm
Location: ATX

Sat May 19, 2018 1:17 am

I personally prefer glazed teaware for gyokuro and unglazed for other Japanese teas. It’s a personal preference as I really don’t want clays altering the flavor of gyokuro. I’m more forgiving with sencha and enjoy trying different clays with them.

I hear people sometimes say that a shiboridashi allows the leaves to expand more than in a houhin (or even a large kyusu) but I see no merit in this idea. The leaves open prefectly well in all but the narrowest teapots.

A humble kyo-yaki houhin like this works perfectly well. It’s one of my favorite pieces despite being made by an unknown potter. I treasure it as much as my famous name teapots.
Attachments
Copyright 2013, All rights reserved.
Copyright 2013, All rights reserved.
D4B67196-D272-428B-8CC5-7FBE0EF4482B.jpeg (343.04 KiB) Viewed 8023 times
User avatar
steanze
Vendor
Posts: 985
Joined: Mon Oct 09, 2017 4:17 pm
Location: USA

Fri May 25, 2018 10:05 pm

Janice wrote:
Fri May 18, 2018 6:50 pm
5405FC15-AD34-4B5F-BB73-834C776D34FA.jpegMy first shiboridashi. I purchased the set from O-Cha when they reopened after the tsunamI. I’m getting very good results even though the shib is glazed. Maybe technique is more important than clay.
Nice set. It looks like it's inspired to the work of Miwa Kyusetsu X.
Post Reply