Yixing

Mark-S
Posts: 735
Joined: Sun Nov 24, 2019 6:05 pm
Location: Germany

Sun Jun 14, 2020 2:17 am

@steanze

This is what F1 calligraphy usually has to look like for me. I still believe that the pot is from the 70's and the steam cooker from the late 80's. Unfortunately, the pot was rejected by the Facebook group's admin (not Lu's group) for some reason. Maybe, I have to ask in Chinese next time. I already showed you the pot. It has to be on one of the 178 pages, but I could not find it anymore. :) If you think that these are bad examples, please upload a photo of your pot, so I can see what it should look like. I also got another one at my parents home, but the calligraphy is very simple.
Attachments
IMG_20200614_084923008-01.jpeg
IMG_20200614_084923008-01.jpeg (120.25 KiB) Viewed 4494 times
IMG_20200614_085007364-02.jpeg
IMG_20200614_085007364-02.jpeg (186.37 KiB) Viewed 4494 times
IMG_20200614_084900559-01.jpeg
IMG_20200614_084900559-01.jpeg (124.38 KiB) Viewed 4494 times
User avatar
OCTO
Posts: 1120
Joined: Wed Aug 15, 2018 6:25 pm
Location: Penang, Malaysia

Sun Jun 14, 2020 4:55 am

IMG_3003.jpg
IMG_3003.jpg (147.63 KiB) Viewed 4485 times
@pantry
@TeaTotaling

Just sharing since we were discussing about staining in DuanNi.

Here are two 80s DuanNi pots I dedicate solely to aged Shou PuErh. It stained darker over time, but with proper care and attention, the patina and staining turned out pretty nice... hahahaha.... I would bring them out to use whenever I'm in the mood to use smaller pots. Both brews up a very decent cup of tea... :D :D :D

Cheers!
Mark-S
Posts: 735
Joined: Sun Nov 24, 2019 6:05 pm
Location: Germany

Sun Jun 14, 2020 5:52 am

OCTO wrote:
Sun Jun 14, 2020 4:55 am
Image

with proper care and attention
What do you mean by that (everybody does this different)? I really like the pot on the left :)
User avatar
Balthazar
Posts: 706
Joined: Mon Apr 02, 2018 7:04 am
Location: Oslo, Norway

Sun Jun 14, 2020 6:57 am

pantry wrote:
Sat Jun 13, 2020 12:15 pm
Balthazar Your comment about people spending disproportionate amount on tea wares reminds me of this interview of Zhou Yu, where he lamented the focus (for some) that had shifted to extravagant tea wares.

Interesting, thanks for sharing this interview! :)
Chadrinkincat
Posts: 902
Joined: Mon Dec 04, 2017 8:16 pm
Location: Brooklyn, NY
Contact:

Sun Jun 14, 2020 7:38 am

steanze wrote:
Fri Jun 12, 2020 8:05 pm
Chadrinkincat wrote:
Fri Jun 12, 2020 7:48 pm

Unlisted prices are normally start at $1000. That pot is from master/famous section though so it’s probably $$$$.
It's by a lesser-known craftsman from the 80s, and it isn't very finely made, so I would be surprised if it's that expensive - but ZAG's prices are on the high side, so it is possible. If they put it in that section, you are right, it probably means that they consider a "high value" item.

Price is probably subject to change which could explain why they keep it private. Similar to to their 60’s pots which aren’t all over $1000. Still a bit odd though to include lesser known craftsman in that section.
DailyTX
Posts: 882
Joined: Wed Jul 03, 2019 4:43 pm
Location: United States

Sun Jun 14, 2020 9:28 am

Can any senior give me some input about this lid? The inner edge of the lid has a texture that reminds me of under fired clay, what do you think? Any possibility that this lid was made pre-factory?
Attachments
thumbnail-IMG_16001.jpg
thumbnail-IMG_16001.jpg (156.65 KiB) Viewed 4457 times
thumbnail-IMG_16000.jpg
thumbnail-IMG_16000.jpg (107.64 KiB) Viewed 4457 times
User avatar
TeaTotaling
Posts: 519
Joined: Sat Apr 25, 2020 3:08 pm
Location: Ohio

Sun Jun 14, 2020 9:30 am

OCTO wrote:
Sun Jun 14, 2020 4:55 am
Image

pantry
TeaTotaling

Just sharing since we were discussing about staining in DuanNi.

Here are two 80s DuanNi pots I dedicate solely to aged Shou PuErh. It stained darker over time, but with proper care and attention, the patina and staining turned out pretty nice... hahahaha.... I would bring them out to use whenever I'm in the mood to use smaller pots. Both brews up a very decent cup of tea... :D :D :D

Cheers!
Got that Milk Chocolate patina going, I love how they look! 🍫

What size are those pots? Do you find larger pots to brew a better cup of tea?
User avatar
TeaTotaling
Posts: 519
Joined: Sat Apr 25, 2020 3:08 pm
Location: Ohio

Sun Jun 14, 2020 9:37 am

@Mark-S This is amusing, but could be a rare coincidence nonetheless. The ZAG pot you like by Research-level senior craft artist-Ding Yaping is sold out!! Someone must have caught wind of all the talk and jumped on it..not a moment to lose, haha 😆

I’ll still try to find out the selling price, so we can all know for certain.
User avatar
steanze
Vendor
Posts: 985
Joined: Mon Oct 09, 2017 4:17 pm
Location: USA

Sun Jun 14, 2020 9:38 am

Chadrinkincat wrote:
Sun Jun 14, 2020 7:38 am

Price is probably subject to change which could explain why they keep it private. Similar to to their 60’s pots which aren’t all over $1000. Still a bit odd though to include lesser known craftsman in that section.

Yes, that makes sense. The craftsman has some reputation, but it is not one of the very top. His name is 丁亚平. His top creative designs would still be very expensive, but the squirrels and grapes pot is a more common one made similarly by many other F1 craftsmen in the 80s. Here is an example of his more creative and refined works, these I'd consider already more awesome :)

https://auction.artron.net/paimai-art5010280032/
User avatar
steanze
Vendor
Posts: 985
Joined: Mon Oct 09, 2017 4:17 pm
Location: USA

Sun Jun 14, 2020 9:40 am

DailyTX wrote:
Sun Jun 14, 2020 9:28 am
Can any senior give me some input about this lid? The inner edge of the lid has a texture that reminds me of under fired clay, what do you think? Any possibility that this lid was made pre-factory?
Image
Image
Good observation, this lid has a couple of features that are compatible with ROC. But, there are also modern replicas that get these details correct. It is hard to say without seeing the whole pot. If you are referring to the texture around the joint between the lid roof and the lid skirt, that texture is not the result underfiring, but rather a result of the way the clay was worked to improve the strength of the joint between the lid roof and the lid skirt :) You can see that the clay near the air hole at the center is "smoother", and near the skirt there is a circular tool mark that left fine lines impressed on the clay.
User avatar
OCTO
Posts: 1120
Joined: Wed Aug 15, 2018 6:25 pm
Location: Penang, Malaysia

Sun Jun 14, 2020 9:50 am

TeaTotaling wrote:
Sun Jun 14, 2020 9:30 am

What size are those pots? Do you find larger pots to brew a better cup of tea?
The Square base is about 180cc and the other is smaller... about 150cc. These pots are small compared to the usual pots I use regularly for PuErh.

Larger pots give you a different experience all together. @Bok recently posted some observations about brewing in larger pots.

Cheers!!
User avatar
OCTO
Posts: 1120
Joined: Wed Aug 15, 2018 6:25 pm
Location: Penang, Malaysia

Sun Jun 14, 2020 9:50 am

steanze wrote:
Sun Jun 14, 2020 9:40 am
DailyTX wrote:
Sun Jun 14, 2020 9:28 am
Can any senior give me some input about this lid? The inner edge of the lid has a texture that reminds me of under fired clay, what do you think? Any possibility that this lid was made pre-factory?
Image
Image
Good observation, this lid has a couple of features that are compatible with ROC. But, there are also modern replicas that get these details correct. It is hard to say without seeing the whole pot. If you are referring to the texture around the joint between the lid roof and the lid skirt, that texture is not the result underfiring, but rather a result of the way the clay was worked to improve the strength of the joint between the lid roof and the lid skirt :) You can see that the clay near the air hole at the center is "smoother", and near the skirt there is a circular tool mark that left fine lines impressed on the clay.
Agree with @steanze. Good observation and input.
User avatar
TeaTotaling
Posts: 519
Joined: Sat Apr 25, 2020 3:08 pm
Location: Ohio

Sun Jun 14, 2020 9:54 am

steanze wrote:
Sun Jun 14, 2020 9:38 am
Chadrinkincat wrote:
Sun Jun 14, 2020 7:38 am

Price is probably subject to change which could explain why they keep it private. Similar to to their 60’s pots which aren’t all over $1000. Still a bit odd though to include lesser known craftsman in that section.

Yes, that makes sense. The craftsman has some reputation, but it is not one of the very top. His name is 丁亚平. His top creative designs would still be very expensive, but the squirrels and grapes pot is a more common one made similarly by many other F1 craftsmen in the 80s. Here is an example of his more creative and refined works, these I'd consider already more awesome :)

https://auction.artron.net/paimai-art5010280032/
@steanze Great intel, thanks for sharing! Now I’m totally curious how much the ZAG one went for. Considering the more refined pot went for almost 10k, I’m wondering what ZAG listed a lesser refined work from this artist at.

@Chadrinkincat, @steanze, and anyone else with the experience...what are some factors which could influence the cost of these pots? Initially, I was curious why there was no price listed, and now it makes sense that it can vary. I’m interested to know why.

Thanks 🙂
User avatar
steanze
Vendor
Posts: 985
Joined: Mon Oct 09, 2017 4:17 pm
Location: USA

Sun Jun 14, 2020 9:56 am

OCTO wrote:
Sun Jun 14, 2020 4:55 am
Image

pantry
TeaTotaling

Just sharing since we were discussing about staining in DuanNi.

Here are two 80s DuanNi pots I dedicate solely to aged Shou PuErh. It stained darker over time, but with proper care and attention, the patina and staining turned out pretty nice... hahahaha.... I would bring them out to use whenever I'm in the mood to use smaller pots. Both brews up a very decent cup of tea... :D :D :D

Cheers!
Nice pots (and cups :) )
User avatar
TeaTotaling
Posts: 519
Joined: Sat Apr 25, 2020 3:08 pm
Location: Ohio

Sun Jun 14, 2020 10:05 am

OCTO wrote:
Sun Jun 14, 2020 9:50 am
TeaTotaling wrote:
Sun Jun 14, 2020 9:30 am

What size are those pots? Do you find larger pots to brew a better cup of tea?
The Square base is about 180cc and the other is smaller... about 150cc. These pots are small compared to the usual pots I use regularly for PuErh.

Larger pots give you a different experience all together. Bok recently posted some observations about brewing in larger pots.

Cheers!!
I do remember reading his insight brewing Yancha in a larger pot. If I remember correctly, he said it was a totally different experience, not necessarily better or worse. I’ll have to dig that post up to give it another read.

What size pots do you normally use for PuErh, and roughly how many grams of leaf in these pots?

🌱🌱🌱
Post Reply