Ode to the Kyusu

AozoraE
Posts: 134
Joined: Mon Dec 04, 2017 10:26 pm
Location: Washington

Wed Nov 27, 2019 10:48 pm

^^Very nice!
I believe he uses Shigaraki clay for his aou(blue teapots). The teapots that Victoria and I posted are actually just shudei pots that have been wood fired.
If you look closely you can still see some red's peaking out around the lid and handle of the pot I posted above.
AozoraE
Posts: 134
Joined: Mon Dec 04, 2017 10:26 pm
Location: Washington

Wed Nov 27, 2019 10:50 pm

Bok wrote:
Wed Nov 27, 2019 6:50 pm


It definitely has... some character to it, doesn't it :D
User avatar
pedant
Admin
Posts: 1516
Joined: Fri Sep 29, 2017 4:35 am
Location: Chicago
Contact:

Thu Jan 02, 2020 1:16 am

this was my first nice teapot. i got it in 2012.

my thoughts from back then:


a tokoname kyusu by UMEHARA Gyokudo (1936-2012; RIP) i got from artisticnippon.
i think the "shochikubai" motifs were done by scratching away the reduction-fired surface to reveal the orange-red clay below.

i really love everything about this pot. it's my first and so far only kyusu (...how long will that stay true? lol).

GYOKUDO shochikubai kyusu
GYOKUDO shochikubai kyusu
Gyokudo-shochikubai-kyusu.jpg (222.52 KiB) Viewed 7037 times

i love the way it feels... like a smooth little pumpkin or something. i love the attention to detail as well. the shape of the handle and the spout, the clean, concentric lines around the rim, the precise lid fit, the shape of the little nubby lid handle..

GYOKUDO kyusu: handstand
GYOKUDO kyusu: handstand
Gyokudo handstand.jpg (60.25 KiB) Viewed 7037 times

check out that filter. he made it super thin/fine. kind of organic looking. trypophobia, anyone?

GYOKUDO kyusu: filter
GYOKUDO kyusu: filter
Gyokudo filter.jpg (293.16 KiB) Viewed 7037 times

a fingerprint captured forever makes it extra special:

GYOKUDO kyusu: fingerprint
GYOKUDO kyusu: fingerprint
Gyokudo fingerprint.jpg (56.65 KiB) Viewed 7037 times

also, the pressure equalization hole cut into the lid is countersunk.
i've looked at this pot a lot, and it really feels like he cared about his work.

GYOKUDO kyusu: lid
GYOKUDO kyusu: lid
Gyokudo lid.jpg (41.02 KiB) Viewed 7037 times

at ~330mL, however, it's slightly on the big side. i get the most use out of it when i have friends over.
User avatar
debunix
Posts: 1812
Joined: Sat Oct 21, 2017 1:27 am
Location: Los Angeles, CA

Thu Jan 02, 2020 1:19 am

Love the fingerprint!
Vanenbw
Posts: 176
Joined: Mon Dec 16, 2019 10:14 pm
Location: NJ, USA

Mon Jan 13, 2020 8:34 pm

This is my first and second kyusu.
20200113_111442-1.jpg
20200113_111442-1.jpg (418.25 KiB) Viewed 6954 times
The one on the left is 360ml. As I gravitate toward drinking smaller cups of tea and multiple infusions, I'm realizing the kyusu is a little too large, especially since I usually drink alone. When I want a larger cup, say 8-9 oz, it's not too bad, but I can probably use a 270ml for that.

The one on the right is my new yohen mogake hiramaru kyusu teapot by Hiroshi Mizuno. It's 160ml. I just received it today; probably won't break it in until tomorrow. I never would have imagined I would be making tea in such a small teapot, but I love it (well, I haven't tried it yet, but I love the way it looks).


20200113_111530-1.jpg
20200113_111530-1.jpg (432.57 KiB) Viewed 6954 times
20200113_111633-1.jpg
20200113_111633-1.jpg (481.04 KiB) Viewed 6954 times
Sorry for the grainy photographs. I got rid of my nice, Canon Rebel XS earlier this year, and all I'm left with are the subpar cameras on my phone and tablet.
User avatar
Victoria
Admin
Posts: 3043
Joined: Sat Sep 30, 2017 3:33 pm
Location: Santa Monica, CA
Contact:

Mon Jan 13, 2020 11:11 pm

Vanenbw wrote:
Mon Jan 13, 2020 8:34 pm
This is my first and second kyusu.
.....
The one on the right is my new yohen mogake hiramaru kyusu teapot by Hiroshi Mizuno. It's 160ml. I just received it today; probably won't break it in until tomorrow. I never would have imagined I would be making tea in such a small teapot, but I love it (well, I haven't tried it yet, but I love the way it looks).

Image

Image
That’s a nice second kyusu you got @Vanenbw. Mogake pattern is pleasing to admire and the low profile really easy to fill and clean. Low profile also works well with cooler temperature Japanese greens.To prevent dripping from the lid, a slower pour works better with low riders 🍃
Vanenbw
Posts: 176
Joined: Mon Dec 16, 2019 10:14 pm
Location: NJ, USA

Tue Jan 14, 2020 4:10 am

Thank you for the information, @Victoria. I'm looking forward to using it. I'll probably brew some tea in it tonight.
User avatar
Darbotek
Posts: 203
Joined: Fri Jan 31, 2020 5:25 pm
Location: East Texas

Mon Feb 10, 2020 5:21 pm

Enjoying the rain and my Yamamoto Hiromi.

Image
User avatar
Chip
Admin
Posts: 371
Joined: Mon Oct 02, 2017 6:47 pm
Location: In the TeaCave atop Mt Fuji
Contact:

Mon Feb 10, 2020 9:05 pm

I went on a bit of a kyusu binge ... long overdue and I realllllly needed more kyusu. :roll:

As a cyclist, we often joke, how many bikes do you, me, we really need? The appropriate response is always "n+1" with n equaling how many one currently owns. Obviously not a minimalist approach. :mrgreen:

I apply the same n+1 to how many kyusu do I need.

"Shall we begin?"

The first one was never used but was created sometime prior to the "sculptor's" death in 1981. Only 5 of these popped up on AN's site. I am extremely pleased to have successfully purchased this one. Very unique and different for Tokoname-yaki.

Instant love!

The kyusu was sculpted, not wheeled, by Sugie Mokusen. According to AN:

"Shudei teapot by Mokusen #5

I had the good fortune to acquire unique teapots in an unused condition from the collection belonging to the family of Mokusen. These teapots are sought after in the vintage market so I was very pleased to be able to obtain them.

Mokusen began sculpting with clay from an early age and started making Shudei teapots later on. He did not use a potter’s wheel to make his pots but instead utilised his excellent sculpting skill and cutting techniques such as mentori (ridged surface), itome (horizontal grooved) and nunome (textile tectured)to produce items with a unique character. In addition he preferred not to grind the rough edges of his pots (as is common in Tokoname) in order to leave them with a more natural texture.

Hand crafted in Tokoname, Japan by Tokoname craftsman Sugie Mokusen (1916-1981)"

Sorry, took the photos tonight in poor lighting.
20200210_213445.jpg
20200210_213445.jpg (420.87 KiB) Viewed 6736 times
20200210_213516.jpg
20200210_213516.jpg (483.97 KiB) Viewed 6736 times
20200210_213550.jpg
20200210_213550.jpg (408.47 KiB) Viewed 6736 times
20200210_213611.jpg
20200210_213611.jpg (455.7 KiB) Viewed 6736 times
20200210_213635.jpg
20200210_213635.jpg (386.56 KiB) Viewed 6736 times
20200210_213700.jpg
20200210_213700.jpg (460.64 KiB) Viewed 6736 times
20200210_220251.jpg
20200210_220251.jpg (427.04 KiB) Viewed 6736 times
User avatar
Victoria
Admin
Posts: 3043
Joined: Sat Sep 30, 2017 3:33 pm
Location: Santa Monica, CA
Contact:

Mon Feb 10, 2020 9:24 pm

Ohhh, a very beautiful filter. Nice to see this special kyusu found a good home. Does the shudei clay feel any different from other burnished (namamigaki) ones you have? Well it looks shiny from burnishing, it could be something else in the clay that gives this effect.
User avatar
Chip
Admin
Posts: 371
Joined: Mon Oct 02, 2017 6:47 pm
Location: In the TeaCave atop Mt Fuji
Contact:

Mon Feb 10, 2020 10:24 pm

Victoria wrote:
Mon Feb 10, 2020 9:24 pm
Ohhh, a very beautiful filter. Nice to see this special kyusu found a good home. Does the shudei clay feel any different from other burnished (namamigaki) ones you have? Well it looks shiny from burnishing, it could be something else in the clay that gives this effect.
I notice this w/ many kyusu featuring physically altered or manipulated exteriors such as Kenji, Yoshiki, Gyokuryu, etc where the exterior is more polished looking while the interior is rougher clay.

Could it be from rubbing during the manipulation of the exterior, namamigaki (Hojo) or a thin "slip" layer of finer or more filtered clay added to the exterior?

I could only speculate ...
User avatar
Chip
Admin
Posts: 371
Joined: Mon Oct 02, 2017 6:47 pm
Location: In the TeaCave atop Mt Fuji
Contact:

Mon Feb 10, 2020 10:30 pm

Not sure how this screen or filter would handle YM fukamushi. I wonder if this sculptor ever saw fukamushi.

Guess I will have to give it a go.

A lot of direct wall filters really cannot handle fuka while Yamada Sou, Junzo, Yoshiki can ..
AozoraE
Posts: 134
Joined: Mon Dec 04, 2017 10:26 pm
Location: Washington

Tue Feb 11, 2020 12:43 am

Darbotek wrote:
Mon Feb 10, 2020 5:21 pm
Enjoying the rain and my Yamamoto Hiromi.
Very nice! One of my personal favorite kyusu makers.
He's been retired for a number of years now but I always love seeing his work
User avatar
Darbotek
Posts: 203
Joined: Fri Jan 31, 2020 5:25 pm
Location: East Texas

Tue Feb 11, 2020 3:02 pm

AozoraE wrote:
Tue Feb 11, 2020 12:43 am
Darbotek wrote:
Mon Feb 10, 2020 5:21 pm
Enjoying the rain and my Yamamoto Hiromi.
Very nice! One of my personal favorite kyusu makers.
He's been retired for a number of years now but I always love seeing his work
It’s something special for sure. I’m minimizing my teaware and wanted a few very special pieces and this is one of them. He must still be making some one offs, because I have a hohin on the way from Chaki Chaki. Thes Du Japon gets some of his stuff still too.
AozoraE
Posts: 134
Joined: Mon Dec 04, 2017 10:26 pm
Location: Washington

Wed Feb 12, 2020 1:20 pm

Darbotek wrote:
Mon Feb 10, 2020 5:21 pm

It’s something special for sure. I’m minimizing my teaware and wanted a few very special pieces and this is one of them. He must still be making some one offs, because I have a hohin on the way from Chaki Chaki. Thes Du Japon gets some of his stuff still too.
Lucky you :D I've wanted one of his houhins for a long time. I was just never able to muster up the courage through to actually pay for one, though. Beautiful stuff though.
Hope you can post a few pictures of it when you get the chance!

I didn't know about Thes/Chaki carrying some of his teawares. I took a look over at Chaki, and it looks like they really had some nice pots of his up, of course now all sold out now. I imagine he still has a lot of stuff over the years that hasn't sold yet that he's holding on to and that people over at Chaki and TDJ probably are able to source directly from him. When I purchased a teapot made by him from awhile ago at teashop in Tokyo they told me that since he's now retired his pots have been more difficult to come by and that was lucky to get one. I suppose there's always a chance he came out of retirement to make to put out a few more pots though :)
Post Reply