Teaware Repair Show-off

Mark-S
Posts: 735
Joined: Sun Nov 24, 2019 6:05 pm
Location: Germany

Fri Jun 18, 2021 4:41 pm

Chadrinkincat wrote:
Fri Jun 18, 2021 3:51 pm
Nice replacement lid. Now you just need to drop this pot on the ground so that you can get a few matching staples.
:lol:
User avatar
Bok
Vendor
Posts: 5782
Joined: Wed Oct 04, 2017 8:55 am
Location: Taiwan

Fri Jun 18, 2021 6:43 pm

Chadrinkincat wrote:
Fri Jun 18, 2021 3:51 pm
Nice replacement lid. Now you just need to drop this pot on the ground so that you can get a few matching staples.
:lol:
Mark-S
Posts: 735
Joined: Sun Nov 24, 2019 6:05 pm
Location: Germany

Sat Jun 19, 2021 4:14 pm

@Bok

Maybe you could answer this, because you are a seller of antique teapots. ;)

If I have a very expensive antique teapot and this teapot has a small chip on the lid, can I let somebody fix this or would this lower the price of the item dramatically if I'd sell the teapot in an auction some day? (Even if it's fixed right) Does it matter how it's fixed? (Kintsugi or restoration)

I've seen professional restorations of broken teapots in Chinese groups. They look like new after the restoration. Do you know someone who could do this?
User avatar
Bok
Vendor
Posts: 5782
Joined: Wed Oct 04, 2017 8:55 am
Location: Taiwan

Sat Jun 19, 2021 7:29 pm

@Mark-S no easy answer to this. Any repair or damage devalues a pot.

If the repair is done well, a repair of any kind recovers some of that value.

If you do a gold repair on a 90s pot, it might actually increase the pots value : )

It all depends on the individual piece and repair. I’d say solid repairs like fittings, rims and caps in precious metals are possibly better value as they will be more future proof. Kintsugi might need refreshments at some point it’s not forever - but then, nothing is.

Invisible repairs exist as well, but can not be done for all kinds of damages. Controversial maybe as the seller might not tell it’s been done and only someone who knows will see where it’s been. Don’t think anyone in the West is capable of doing this method though it’s highly specialised. I think for museums they do a cosmetic version of it that only looks whole but would not stand usage. Not sure though.
User avatar
TankCla
Posts: 7
Joined: Sat Jan 09, 2021 3:07 pm
Location: Stoney Creek, Canada

Fri Aug 13, 2021 6:14 pm

I do not want to brag about it, but I like how it ended up ;).
First time attempting a repair.
Attachments
20210813_190917.jpg
20210813_190917.jpg (190.83 KiB) Viewed 9223 times
20210813_190901.jpg
20210813_190901.jpg (190.59 KiB) Viewed 9223 times
User avatar
Victoria
Admin
Posts: 3043
Joined: Sat Sep 30, 2017 3:33 pm
Location: Santa Monica, CA
Contact:

Fri Aug 13, 2021 6:21 pm

TankCla wrote:
Fri Aug 13, 2021 6:14 pm
I do not want to brag about it, but I like how it ended up ;).
First time attempting a repair.
Image
Image
Very nice joint. What did you use? I recently fixed a few broken kyusu handles with j-bweld and added extra epoxy inside kyusu handle for added strength and structure. Curing now, when I get back home I’ll share pictures.
User avatar
TankCla
Posts: 7
Joined: Sat Jan 09, 2021 3:07 pm
Location: Stoney Creek, Canada

Fri Aug 13, 2021 6:34 pm

Victoria wrote:
Fri Aug 13, 2021 6:21 pm
TankCla wrote:
Fri Aug 13, 2021 6:14 pm
I do not want to brag about it, but I like how it ended up ;).
First time attempting a repair.
Image
Image
Very nice joint. What did you use? I recently fixed a few broken kyusu handles with j-bweld and added extra epoxy inside kyusu handle for added strength and structure. Curing now, when I get back home I’ll share pictures.
I used Gorilla epoxy. I thought due to the location of the crack, I needed something that will cure fast. Gorilla has 5 minutes cure.

For the color, I used food-safe gold sparkle from Amazon. Actually the main ingredient it is chocolate and after a few trials in mixing the dye, I have found that brown/chocolate color doesn't bleed if I mix the dye with the epoxy after 3 minutes of mixing the epoxy.
User avatar
TankCla
Posts: 7
Joined: Sat Jan 09, 2021 3:07 pm
Location: Stoney Creek, Canada

Fri Aug 13, 2021 6:40 pm

This is how the mix looked before applying.
Attachments
20210813_193801.jpg
20210813_193801.jpg (106.86 KiB) Viewed 9216 times
User avatar
TankCla
Posts: 7
Joined: Sat Jan 09, 2021 3:07 pm
Location: Stoney Creek, Canada

Fri Aug 13, 2021 6:44 pm

Very nice joint
The back of the joint looks even nicer. I like the gold sparkling. It is eye catching.
I actually made a mistake, as you can see in the picture, and it doesn't look bad at all.
Pictures doesn't make it justice 😂
Attachments
20210813_193703.jpg
20210813_193703.jpg (60.9 KiB) Viewed 9215 times
User avatar
pedant
Admin
Posts: 1516
Joined: Fri Sep 29, 2017 4:35 am
Location: Chicago
Contact:

Tue Aug 17, 2021 12:14 pm

@TankCla, that looks nice.

I'm glad you resisted the temptation to wipe that off. That is a common mistake that always makes it look worse. You can probably fix that small booger now if you want by carefully scraping it with a thin razor blade.

Worst time by far to address overapplication is to wipe when wet. This smears it into the surface and makes it difficult or impossible to cleanly remove later. Best time is to scrape after partial cure (75% or so) when it is solid and no longer tacky but is still a little soft (just be careful not to stress the joint). Second best time is after full cure.
User avatar
TankCla
Posts: 7
Joined: Sat Jan 09, 2021 3:07 pm
Location: Stoney Creek, Canada

Tue Aug 17, 2021 12:24 pm

@pedant,
I like it the way it is now. It was my favorite kyusu, now I like it even more.
My wife said I am crazy when I told her that I am waiting to break again, and if it doesn't, I can help a bit :roll: , to fix it and give it personality.
User avatar
pedant
Admin
Posts: 1516
Joined: Fri Sep 29, 2017 4:35 am
Location: Chicago
Contact:

Tue Aug 17, 2021 12:27 pm

I think the epoxy color really complements the pot. Better even than "real" gold kintsugi.

That thick bleedout also looks great.
User avatar
debunix
Posts: 1812
Joined: Sat Oct 21, 2017 1:27 am
Location: Los Angeles, CA

Tue Aug 24, 2021 10:43 am

Can you share the 'gold sparkle' you used? Was this the stuff?

Wilton Gold Sparkle Gel

I've got some clear JB Weld and pots that need work, and was planning on using plain stuff, but hadn't really considered a golden 'hack' like this....
maple
Posts: 39
Joined: Wed Apr 21, 2021 3:01 pm
Contact:

Fri Sep 03, 2021 11:28 am

Image
Image


just wanna show off :roll:
User avatar
teanik
Posts: 43
Joined: Sat Jun 26, 2021 5:45 pm
Location: Canada West Coast

Fri Sep 03, 2021 7:08 pm

Very handsome work, @maple. Sure would like to know what those fascinating pots are.
Post Reply