Page 206 of 393
Re: Yixing
Posted: Wed Sep 09, 2020 5:27 am
by OCTO
Bok wrote: ↑Wed Sep 09, 2020 2:46 am
klepto wrote: ↑Wed Sep 09, 2020 1:58 am
Has anyone noticed that different yixing teapots can change the texture of the tea as it goes down your throat? I was giving one of my teapots that gets ignored some love and I noticed that the tea I had before which had a silk smooth texture was rough and almost scratchy. This teapot is a bronze grade CP teapot and I was previously using an F1 green label pot.
Haha, you’re doomed now that you discovered the subtleties of clays
@klepto
You’re definitely seeing some light at the end of the tunnel!!! If you focus your vision hard enough, you’ll see me waving back at you!!
Yes indeed you’re on the right path....
It’s a whole new world!! A dazzling place I never knew....
Do you have a porcelain Gaiwan and cups that are neutral in brewing?? Do a side by side comparison test... you will find it to be even more exciting!.... hahahahaha.... I have a pot that adds a sweet aftertaste in my mouth for ShouPuerh... well.. that’s another story
.
Cheers!!
Re: Yixing
Posted: Wed Sep 09, 2020 8:30 am
by Chadrinkincat
klepto wrote: ↑Wed Sep 09, 2020 1:58 am
Has anyone noticed that different yixing teapots can change the texture of the tea as it goes down your throat? I was giving one of my teapots that gets ignored some love and I noticed that the tea I had before which had a silk smooth texture was rough and almost scratchy. This teapot is a bronze grade CP teapot and I was previously using an F1 green label pot.
Body/texture is prob #1 reason many of us are using yixing teapots.
Very porous pots are only ones that have given me the rough and scratchy feel.
Re: Yixing
Posted: Wed Sep 09, 2020 10:09 am
by klepto
@Bok @OCTO @Chadrinkincat I use gaiwans the first time I try a tea. So I've noticed the disturbance in the force but I can't use the force, that hurts
. I now see myself owning more pots now or I could just take OCTO's collection
Re: Yixing
Posted: Wed Sep 09, 2020 5:36 pm
by OCTO
klepto wrote: ↑Wed Sep 09, 2020 10:09 am
Bok OCTO Chadrinkincat I use gaiwans the first time I try a tea. So I've noticed the disturbance in the force but I can't use the force, that hurts
. I now see myself owning more pots now or I could just take OCTO's collection
@klepto
Hahahahaha..... the force is strong
Re: Yixing
Posted: Sun Sep 13, 2020 1:23 pm
by ezpzeke
...
Re: Yixing
Posted: Sun Sep 13, 2020 6:36 pm
by Bok
@ezpzeke can’t really be sure of anything without clearer pictures overall and in particular of the insides of body and lid.
The underside raises some doubts.
Colour/patina looks on first impression more like it’s a brown Chaozhou, not Yixing.
Re: Yixing
Posted: Sun Sep 13, 2020 7:29 pm
by Teas We Like
ezpzeke wrote: ↑Sun Sep 13, 2020 1:23 pm
hello everyone!
a private seller that i'm talking with has mentioned that this piece was initially sold to him being indicated as either late qing or early roc.
i'm always skeptical when i hear this kind of statement, hah!
i think that the craftsmanship appears to resonate with some examples i've seen from that period, but i figured i'd ask you all your opinion? i'm certainly no expert.
thanks!
it does not look right to me...
Re: Yixing
Posted: Sun Sep 13, 2020 10:34 pm
by Chadrinkincat
@ezpzeke
Doesn’t look like yixing. Looks more like a modern CZ pot.
Re: Yixing
Posted: Mon Sep 14, 2020 5:36 am
by OCTO
@ezpzeke
I concur with
@steanze,
@Bok and
@Chadrinkincat.
The pot looks ChaoZhou and it’s more likely modern than LQ/ER.
Cheers!
Re: Yixing
Posted: Mon Sep 14, 2020 8:58 am
by ezpzeke
...
Re: Yixing
Posted: Wed Sep 16, 2020 3:56 pm
by Rmt
Re: Yixing
Posted: Wed Sep 16, 2020 4:40 pm
by DailyTX
@Rmt
Looks like molded to me. The material for casting zisha needs to be finer, often you can see a casting line on the handle that’s symmetrical with the line on the body. It’s not a hard rule as people can clean up those lines. Despite of missing the cow head, it may still be a good pot for brewing tea grandpa style
Here is the discussion a few members had a while back
viewtopic.php?f=19&t=18&p=21360&hilit=Slipcast#p21360
Re: Yixing
Posted: Wed Sep 16, 2020 5:41 pm
by OCTO
@Rmt
The pot looks pretty decent to me.... with the exception of the decapitated ox.. hahahaha... the clay texture from under the lid points pretty much towards circa 80s factory pot. How does it weigh in your hands? Does it feel weighted or hollow?
My avatar is taken off a 60s Ox pot of the same size... hehehe...
Cheers!!
Re: Yixing
Posted: Thu Sep 17, 2020 1:46 am
by Rmt
Thanks for the replies!
DailyTX wrote: ↑Wed Sep 16, 2020 4:40 pm
@Rmt
Looks like molded to me. The material for casting zisha needs to be finer, often you can see a casting line on the handle that’s symmetrical with the line on the body. It’s not a hard rule as people can clean up those lines. Despite of missing the cow head, it may still be a good pot for brewing tea grandpa style
Here is the discussion a few members had a while back
viewtopic.php?f=19&t=18&p=21360&hilit=Slipcast#p21360
I just got to work, so I haven't got the pot in front of me. There's a definitely a sort of line on the handle, but there's no lines on the body. I'll have a look at the discussion you posted.
OCTO wrote: ↑Wed Sep 16, 2020 5:41 pm
@Rmt
The pot looks pretty decent to me.... with the exception of the decapitated ox.. hahahaha... the clay texture from under the lid points pretty much towards circa 80s factory pot. How does it weigh in your hands? Does it feel weighted or hollow?
My avatar is taken off a 60s Ox pot of the same size... hehehe...
Cheers!!
I thought it felt sort of light, not very heavy at least. I'll check again when I get back from work in the afternoon.
Re: Yixing
Posted: Thu Sep 17, 2020 12:43 pm
by Rmt
Made some Japanese black tea with the pot just now (blended with Japanese mugwort). Turned out really nice, but the pot has got a messy pour. Very happy with the find, never in my life expected to come across something like this in this part of the country!