Yixing

DailyTX
Posts: 882
Joined: Wed Jul 03, 2019 4:43 pm
Location: United States

Tue May 03, 2022 1:26 pm

.m. wrote:
Tue May 03, 2022 1:02 pm
DailyTX Green label?
I am not sure lol. My guess is pre 1977 if it’s what appears to be or a replica. This pot is close to 60 ml instead of 40 ml. Good lid fit and beautiful pour. I have 80s hongni pot and the clay texture seems different. The chop on the bottom was used between late 60s to mid 70s.
User avatar
Bok
Vendor
Posts: 5782
Joined: Wed Oct 04, 2017 8:55 am
Location: Taiwan

Wed May 04, 2022 9:07 pm

DailyTX wrote:
Mon May 02, 2022 5:43 pm
I haven't had too much exposure to F1 and Antique Hongni, I recently acquired this little pot, about 40 ml. Does it look like 70s hongni?
Looks alright to me. At least I don't see any apparent red flags...
DailyTX
Posts: 882
Joined: Wed Jul 03, 2019 4:43 pm
Location: United States

Wed May 04, 2022 9:59 pm

Bok wrote:
Wed May 04, 2022 9:07 pm
DailyTX wrote:
Mon May 02, 2022 5:43 pm
I haven't had too much exposure to F1 and Antique Hongni, I recently acquired this little pot, about 40 ml. Does it look like 70s hongni?
Looks alright to me. At least I don't see any apparent red flags...
@Bok
Awesome 👍. The elongated lid knob, and flat bottom vs. non flat bottom got me worried.
User avatar
Teafortea
Posts: 220
Joined: Sun May 15, 2022 2:29 am
Location: France

Mon May 16, 2022 11:50 am

Hello, I’m so new to yixing but not to tea. A friend gifted me these two teapots. She told me one is more expensive but she could not tell me which one. Now the mystery: which one is the good one? Are they ok to use?
Attachments
1
1
377EECC0-B90D-441A-B74B-2AEF2B56FCB0.jpeg (172.13 KiB) Viewed 2966 times
2
2
ACE023F0-C274-45B7-9170-9F95C572A44E.jpeg (131.82 KiB) Viewed 2966 times
3
3
4A37F217-057B-4C7A-A26D-8710454D5A68.jpeg (118.71 KiB) Viewed 2966 times
4
4
BB90C90E-83E7-406B-9E34-BC549155A211.jpeg (130.05 KiB) Viewed 2966 times
5
5
E522A16F-1587-454C-BDF4-7F0F996F047F.jpeg (116.39 KiB) Viewed 2966 times
6
6
DEB1C942-B86F-450A-B07E-6A60496F7446.jpeg (133.49 KiB) Viewed 2966 times
7
7
B1F208EB-403A-42D4-B048-B5BD516587F6.jpeg (144.06 KiB) Viewed 2966 times
8
8
3DBAC812-48EB-4419-81FE-3872D702217B.jpeg (112.43 KiB) Viewed 2966 times
9
9
304E9C1B-7322-4F7E-867A-4EE60742C3B3.jpeg (117.8 KiB) Viewed 2966 times
10
10
5D10964C-532B-41BB-A5FA-1BA322F5D499.jpeg (109.73 KiB) Viewed 2966 times
Last edited by Teafortea on Thu Jun 09, 2022 6:23 am, edited 2 times in total.
.m.
Posts: 877
Joined: Wed Oct 11, 2017 3:26 pm
Location: Prague

Mon May 16, 2022 1:28 pm

User avatar
Teafortea
Posts: 220
Joined: Sun May 15, 2022 2:29 am
Location: France

Mon May 16, 2022 1:56 pm

Ah thank you!! Yes that looks the same. Good to know. What does it mean when it says not the best clay was used? I’ve always heard yixing if not authentic can be dangerous.
User avatar
Bok
Vendor
Posts: 5782
Joined: Wed Oct 04, 2017 8:55 am
Location: Taiwan

Mon May 16, 2022 7:40 pm

Teafortea wrote:
Mon May 16, 2022 1:56 pm
Ah thank you!! Yes that looks the same. Good to know. What does it mean when it says not the best clay was used? I’ve always heard yixing if not authentic can be dangerous.
The more expensive is not necessarily the better one. None of them will kill you, they might kill your tea, but that’s another matter… bad clay can mean many things: not from Yixing, with additives, fired at not optimal temperatures and so fourth.

Just try and see how you like it, preferably compare with a more neutral material like a porcelain gaiwan.
User avatar
Teafortea
Posts: 220
Joined: Sun May 15, 2022 2:29 am
Location: France

Mon May 16, 2022 11:31 pm

That is how I’ve always drank my teas, with my old friend gaiwan but now I opened up a whole new world😅. From what I tested last night, one of them has a high pitch when I move the lid around. The other not even a pitch.
.m.
Posts: 877
Joined: Wed Oct 11, 2017 3:26 pm
Location: Prague

Tue May 17, 2022 3:02 am

Teafortea wrote:
Mon May 16, 2022 1:56 pm
Ah thank you!! Yes that looks the same. Good to know. What does it mean when it says not the best clay was used? I’ve always heard yixing if not authentic can be dangerous.
Likely it is a genuine yixing clay, but may contain some additives, such as iron oxide to enhance the red color. Likely fine to use, I wouldn't worry about it too much. That clay quality assessment is most likely either based on a) visual and esthetic examination of the texture of the clay in comparison to other hongni pots, or on b) the effect on tea. It could also refer to c) the composition of the clay, such as iron content etc., but that demands a spectroscopic analysis so it is rarely done.
User avatar
Teafortea
Posts: 220
Joined: Sun May 15, 2022 2:29 am
Location: France

Tue May 17, 2022 10:25 am

Thank you for your input ! I’ll try them with some shui Jin. :).
mael
Posts: 30
Joined: Mon Dec 18, 2017 12:52 pm
Location: France

Tue May 17, 2022 2:33 pm

I have one of this F2-F5 teapot, I bought it from chawang shop a few years ago. It appears zisha art gallery has one to sell too.

It is quite a large pot, it looks quite goofy, clay looks quite different than other yixing teapots, but pour is fast and ball filter very useful.

It makes good tea, perform like a gaiwan, very neutral and close to no mutting at all, and I enjoy green oolong and even green teas with it.
In fact it is the only clay teapot I had success with brewing chinese green tea. I would cover the bottom with leaves and put around 60-70-80ml for intense shot of green tea :)
Also being quite large it will allows balled shape taiwanese oolong to expand nice.

Not the best looking teapot but a very good performer :)
User avatar
Teafortea
Posts: 220
Joined: Sun May 15, 2022 2:29 am
Location: France

Wed May 18, 2022 2:28 pm

Thank you for your input. I made some tea in both of them. It was ok. Is it something wrong with my taste that I prefer gaiwan? I :D
mael
Posts: 30
Joined: Mon Dec 18, 2017 12:52 pm
Location: France

Wed May 18, 2022 2:48 pm

Might be that the teapot need more seasoning, you should keep using it from time to time it won't disapoint :)
Chadrinkincat
Posts: 902
Joined: Mon Dec 04, 2017 8:16 pm
Location: Brooklyn, NY
Contact:

Wed May 18, 2022 10:18 pm

I just got this ROC pot which came as a set. Elegant lines and beautiful clay. It looks to be around 70ml so probably ideal for higher end yancha.
Attachments
C38EA0B4-77E0-4934-8512-F7B95121E929.jpeg
C38EA0B4-77E0-4934-8512-F7B95121E929.jpeg (186.52 KiB) Viewed 2751 times
B2187B7A-090F-479E-8896-B63628E86A8D.jpeg
B2187B7A-090F-479E-8896-B63628E86A8D.jpeg (193.5 KiB) Viewed 2751 times
User avatar
Youzi
Posts: 533
Joined: Tue Sep 24, 2019 1:03 pm
Location: Shaxi, Yunnan, China
Contact:

Thu May 19, 2022 12:45 am

Chadrinkincat wrote:
Wed May 18, 2022 10:18 pm
I just got this ROC pot which came as a set. Elegant lines and beautiful clay. It looks to be around 70ml so probably ideal for higher end yancha.
Image
Image
That looks as good as a modern pot. Very nice find. Maybe one of the best ROC SPs, I've seen shared around here. :D
Post Reply